Jeg havde en NH-U14S i et Fractal Design R4 kabinet. Med den er der kun plads til 2 ram klodser, bare så du er obs på det. Den køler godt, men er stor :) NH-D15 er rigtig stor.
--
Handler: http://www.hardwareonline.dk[...]

Kan anbefale U12S'eren. Køler stort set lige så godt som de andre. Derudover er den kompatibel med alle ram mv - dvs. ingen problemer med den fysiske placering. Lidt reviews: http://www.techpowerup.com[...] Eller som anand skriver i sin konklusion: The NH-U12S is basically at least as good as the stalwart NH-D14, but it's smaller and it's cheaper. Meanwhile, the big brother NH-U14S puts in a solid performance of its own, but losing that top PCI Express port for just a couple more degrees of performance is a major drag. These are both excellent air coolers in their own right, but if you're looking to spend premium cash on an air cooler, I'd go with the NH-U12S and then probably tack a second NF-F12 PWM fan on to the order. http://www.anandtech.com[...]
--
Gæstebruger, opret dit eget login og få din egen signatur.

Depends on your RAM, Mugen 4 is also fine: http://www.edbpriser.dk[...] (compatible with low profile RAM). Performance: http://www.techpowerup.com[...]
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Hvis du mangler plads kan du jo altid kigge på noget all-in-one vandkøling.
--
Gigabyte Z77X-D3H i5 3750k @ 4.3GHz - Corsair H100i 8GB Corsair Vengeance Asus GTX780 DirectCU II OC

Jeg køber den nye i7-4790 hvilket betyder at jeg ikke kan lave OC. Regner med at NH-U12S er fin så :)
--

#1 Der afhænger jo også af hvilket bundkort du har.
--

#5 Dude, buy i7-4770K - the same price as i7-4790 and you got possibility to OC (with proper motherboard) in the future. It will be also easier to sell i7-4770K in the future. i7-4790 -> 3,6GHz -> 4GHz (turbo mode) i7-4770K -> 3,5GHz -> 3,9GHz (turbo mode) ... OC possible (that 0,1GHz practically make no difference) ... but if it was ... i7-4770K OC @ 4,6GHz - then yes, it`s a difference - and with i7-4770K you can do such an OC (with proper motherboard and decent cpu cooler) in the future. And again - cpu cooler ... depends (compatibility on an ATX mobo) on RAM pick.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Den nye 4790 har jo også andre fordele end bare 0,1 GHz mere
--

Forresten, ved i om både NH-U12S og NH-U14S kan være på MSI Z97 GAMING 5 uden at forstyrre RAM blokene?
--

"Den nye 4790 har jo også andre fordele end bare 0,1 GHz mere" - yyy ... which? http://www.guru3d.com[...] "The Haswell refresh by itself however is nothing more then a small speed increment on the clock frequency of the base and turbo clocks." You really mess up things Julius, i7-4790 = Haswell Refresh, a cpu as i7-4770 (non K - no OC) ... but only with higher clock. Devil`s Canyon - are only 2 cpus: 1) i7-4790K 2) i5-4690K "Devil’s Canyon, the codename for the upgraded Haswell overclocking ‘K’ series SKUs, launches as two parts: an i7 and an i5." - and they are also based on Haswell. If you are 100% sure that you never gonna OC - then yes, i7-4790 is a good choice ... but then ... Z97 motherboard (Z97 chipset allows OC) isn`t the best choice, because it`s kinda a nonsense to buy a non-overclockable cpu and motherboard which allows OC. But on the other hand - you never know, maybe one day you would like to OC, it`s gonna be easier to sell i7-4770K - then, if the price is very similar, why i7-4790? (i really don`t like to write the same thing twice ;). If you want tips - what`s your budget, what are your preferences ... and i`ll "build" the best PC for you that you can buy, that suits your needs. #9 NH-U12S is 100% RAM / motherboard compatible, it won`t block any RAM slot. NH-U14S: http://www.noctua.at[...] - unfortunately they don`t check high profile RAM compatibility (and that`s what you are asking for). NH-U14s is compatible (as every cpu cooler is) with low profile RAM, there might be / or not - problem with high profile RAM, f.e. here: http://www.tomshw.it[...] it works, but really tight and ... depends also on RAM`s heatsink. If you plan to buy tall (high) RAM - then NH-U12S to be 100% sure. If you gonna plan to OC - then low profile RAM and f.e. Noctua NH-D14 / D15 or Be Quiet! Dark Rock 3 / Pro 3. You could also focus on Be Quiet! Dark Rock 3: http://cdn.eteknix.com[...] http://www.pricerunner.dk[...] - but only with low profile RAM. There`s Dark Rock 3: http://www.technic3d.com[...] and Dark Rock Pro 3: http://www.technic3d.com[...]
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

"Den nye 4790 har jo også andre fordele end bare 0,1 GHz mere" - yyy ... which? http://www.guru3d.com[...] "The Haswell refresh by itself however is nothing more then a small speed increment on the clock frequency of the base and turbo clocks." You really mess up things Julius, i7-4790 = Haswell Refresh, a cpu as i7-4770 (non K - no OC) ... but only with higher clock. Undskyld :P Jeg troede bare at den havde nogle nye teknologier
--

#10 I really like how you help people. Unlike others, you actually have the ability to put yourself in the place of the person you are helping and what they need. A lot of people could learn from that. Kudos.
--
Jeg har en usædvanlig deform penis.

#12 Enig
--

#0 Kan KLART anbefale nh-u12s ! Jeg har den selv og den holder min i5-3570k på 55-62 grader under fuld load - og her skal det siges at min cpu ikke er overclocket, men at mit bundkort giver den forholdsvist mange volts i forhold til, at den er "stock". Hvilket vil sige at den bliver varmere, end den egentligt har behøves :) Dog vil jeg anbefale at købe en ekstra fan med så du kører push/pull :) gør nok ikke den helt store forskel, men det giver lige "det" ekstra :P
--

#7 nu når du siger i et ordentligt motherboard og en decent cpu køler, jeg har lige købt mig selv et I7 4770k + en Sapphire VAPOR-X R9 280X. Har du nogle forslag til et bundkort og evt også en cpu køler der passer til det du skrev. Altså det med fremtidig overclock etc
--
Ja Mojn Do ?

Jeg kører selv med en NH-U14S, og jeg er fanme imponeret. Jeg var dog nødt til at flytte mit netkort ned i bunden af mit bundkort da mit øverste slot er PCI-e x1, så gør det mig faktisk ikke noget. Den sparker røv på AiO-120mm kølere - endda med en meget god margin. Kører pt. 4.4GHz med 1.2 volt på en 3770K. Max temps er lige over de 70 grader. Har i øvrigt ikke problemer med ram, da jeg kører med low-profile.
--
Jeg har en usædvanlig deform penis.

#10 Jeg regner med at købe Corsair Vengance Pro, men skal kun have to af dem, så selvom de er høje så tror jeg ikke det bliver noget problem
--

#12 Cheers ;) #15 Depends on your budget (how much you want to spend on it) and preferences (heavy OC, just a little OC, possible OC, shall it be silent) and features that you need from motherboard. Some different tips: 1) http://www.edbpriser.dk[...] - low cost, OC possible, Z87 chipset. 2) http://www.edbpriser.dk[...] - OC, Intel LAN (better than Realtek), Z97 chipset. 3) http://www.edbpriser.dk[...] 4) https://www.komplett.dk[...] - a lot of features, CF ready (with decent performance), better soundcard, ready for heavy OC. Cpu cooler: 1) good price + very good performance, and silent: http://www.edbpriser.dk[...] 2) great performers: - Be Quiet! Dark Rock 3, Dark Rock Pro 3, Noctua NH-D14, NH-D15 ... depends also if you want to use PWM fan, or 1 - constant speed, depends also on OC. If you don`t plan to do any hardcore OC then mobo 2 and 3, if you want it to be very cheap - mobo 1. Cpu cooler - Mugen 4 has great price / performance ratio, however it`s not ultra easy to install. Low profile RAM needed.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

#17 Mobo producer used to recommend installing 2 modules in #1 / #3 RAM slots, but f.e. ASUS Z97-C: http://dlcdnet.asus.com[...] page 1-7 ... there`s no info about it - anymore. So in #2 / #4 slots it should also work fine with Z97-C, so NH-U14S is fine. I have also checked MSI Z97 Gaming 3 ... and they recommend #2 / #4 ... so things has changed. Unfortunately, f.e. Mugen 4 sits over #2 RAM slot: http://imagescdn.tweaktown.com[...] and installing RAM in #3 / #4 slots ... ain`t something that producer recommends. But f.e. NH-U14S: http://www.tweak.dk[...] - tought one with #1 / #3 slots, but if we put RAM (if it`s a tall one) in #2 / #4 slots - it will be fine.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

#19 Okay :) Det var da godt! Forresten, jeg hvad er forskellen på MSI Z97 GAMING 5 og MSI Z97 G45 eller GD65 ???
--

#20 Some features, but you would have to hire a detective, i always hate to compare motherboards :-x ;) One thing is for sure - no matter if you buy G45, GD65 or GAMING 5 - all of them will work. If you don`t need any special futures and advanced power phasing system (for some hardcore OC) - you`ll be fine with the cheapest one. Z97 GAMING 3 should be also fine for you (i assume you don`t need any specific mobo`s features ... and you not gonna take a part of an OC contest ;) What about some OC? - sure, it is possible.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

#21 Altså jeg køber som du og mange andre anbefaler i-4770K og kommer ikke til at lave OC på den i et stykke tid. Men jeg kan som sagt godt forestille mig at jeg lave nogle forsigtige OC om et halvt år måske :) Vedrørende bundkortet, så synes jeg ikke så godt om GAMING 3 fordi den kun har en PCIe 3.0, hvis jeg forstår det rigtigt? Kopieret fra Komplett: Udvidelsesmulighed(er) 1 x CPU 4 x DIMM 240-pins 1 x PCIe 3.0 x16 1 x PCIe 2.0 x16 ( x4-modus ) 2 x PCIe 2.0 x1 ( auto turn-off if PCI Express 2.0 x16 slot are occupied ) 3 x PCI Er det ligegyldigt? Jeg vil nemlig gerne have mulighed for at lave Crossfire på et tidsspunkt
--

PCIe 2.0 is also fine, but not x4-modus ... if it was PCIe 2.0 x8-modus or x16-modus -> then no problem with that. If you plan to use CF in the future (not recommended, it`s much more problematic than 1 card and in some games it`s not working, you also gonna need bigger PSU ... and one high-eng gfx is usually fine for 1920*1080 + AA/AF) then yes - Gaming 3 is not for you, as i`ve said - mobo pick depends on features which you need. I assume that you don`t care that much about money, then MSI Z97 Gaming 5 or Gaming 7 ... or ASUS Maximus VII Ranger: https://www.komplett.dk[...] are nice choises. It`s a price level for mobos (1100-1300kr.) where you can find really nice products (features and quality).
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

#23 Jo jeg tænker en del på penge :P Men når jeg alligevel skal betale omkring 9k for en computer, så er jeg lidt ligeglad om jeg betaler 100 kroner fra og til. Det betyder ikke det store hvis bare jeg får det rigtige.
--

Ask yourself if you gonna use CF for sure. How do you see it? Would you buy another R9-290 in 2 years time? - after 2 years it might be better to buy new high end card instead of CF ... is anybody using GTX 580 SLI? or ... HD 5870? 3 hours per day of gaming = 600W usage from second card = 0,6kW/h ... i don`t remember the price, it`s about 2kr./1kW or 3kr./1kW. Let`s say it cost 2,5kr. ... so you got 1,5kr. per day, +- 45kr. per month ... one year of using CF/SLI cost you +- 540kr. 2 years = 1180kr. - you could spend those money on single gfx ;) ... unless your parents pay bills ;) ... and what if you play more? - some people can spend 10hours per day playing computer games during weekend, 10h = bill might be 500kr. higher because of using CF/SLI ... or 700kr. / 800 kr. - per year. So in long term ... using CF/SLI (with a card that needs quite a lot of energy) isn`t much economical, it`s better to invest those money and buy one - high end - gfx, which is much more problematic than CF/SLI. And if you sell R9-290 after 2 years for +- 1200kr. - then you add 1800kr. - and you buy R9-390 ;) - which should be fine for next 2 years ... etc. Then you can buy Z97 Gaming 3 and RM650. However RM750 cost only 100kr. more (but is 18cm long, RM650 is 16cm - which don`t matter if case is big enough). When you gonna buy that PC? ;)
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

"Ask yourself if you gonna use CF for sure. How do you see it?" Det er bestemt ikke noget jeg har planlagt, bare en mulighed som jeg tænkte kunne være rar at have :) "Would you buy another R9-290 in 2 years time? - after 2 years it might be better to buy new high end card instead of CF ... is anybody using GTX 580 SLI? or ... HD 5870?" Det har jeg også tænkt på, og svaret er jo nej. Så jeg kommer nok bare til at købe et nyt grafikkort når jeg mangler det i stedet :) "... unless your parents pay bills ;)" Ja, det gør de ;) "Then you can buy Z97 Gaming 3 and RM650." Lyder som en god ide :D Er RM650 også nok hvis jeg køber R9 390? "When you gonna buy that PC? ;)" Jeg bestiller delene på mandag eller tirsdag. Der er jo ikke nogen ide i at gøre det før da alle alligevel har fri og så kan jeg jo bruge tiden på at researche
--

Lige en ting mere :) "However RM750 cost only 100kr. more (but is 18cm long, RM650 is 16cm - which don`t matter if case is big enough)." Som du nok kan huske så skal jeg have Fractal Design Define R4, så der burde være plads. Prisforskellen er faktisk kun 50 kroner.
--

RM750 - yes, better choice. R9-390* - that was something hypothetical ;) - but RM750 for 1 graphic card (1 gpu) will be fine, RM650 should be also ... but the price difference is so low that makes RM650 not the best choice.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Oooookay ;DD Så kommer min indkøbsliste til at se sådan ud i morgen: Fractal Design Define R4 Arctic White Corsair RM750 MSI Z97 GAMING 3 Crucial 120 GB SSD Corsair Vengance Pro 16GB Intel Core i7-4770K Sapphire R9 290 Tri-x ;DDDDD
--

Get this SSD: http://www.edbpriser.dk[...] And you don`t need 16GB RAM - for sure, get this RAM (low profile): http://www.computersalg.dk[...] or this RAM - tall profile: http://www.computersalg.dk[...] What about a decent cpu cooler - you decided yet? ... and DVD-RW?
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

"And you don`t need 16GB RAM" Heller ikke til video og billedredigering..? Jeg har en drøm om at blive prof fotograf, så videoredigering er ikke så vigtig, men jeg har da hørt at man gerne skal have 16gb RAM til billedredigering. CPU køler, glemte jeg lige :) Det bliver en Noctua NH-U14S
--

#31 +- ... everything depens on multitasking (f.e. if you gonna have million heavy programs opened at the same time - then RAM is important) ... but 8GB RAM is still a lot ... if it`s not gonna be a lot of heavy programs opened at once - you`ll be fine with 8GB RAM, which is quite a lot, also for video and photo editing. Here you got something else: http://www.anandtech.com[...] - faster RAM + lower CL ... yes, yes, yes. NH-U14S - will be fine, as RAM has to be installed in #2 / #4 slots = no problem with tall RAM (and 2 modules).
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Altså Photoshop og Lightroom er to store programmer, men jeg kan selvfølgelig altid købe flere GB RAM til senere hvis jeg synes. Men ehh... Lad os sige at jeg køber 8GB RAM. Så skal det jo gerne være en blok, for ellers kan det ikke være der hvis jeg vil have 16.... Er det muligt at købe en blok 8 GB G.Skill alene?
--

Eller bliver jeg nød til at købe NH-U12S for at være sikker på at kunne udnytte alle 4 RAM blokke?
--

I found something like this: http://www.gavtrain.com[...] - but ... i don`t trust those "simple" tests :-x ;) However ... if you plan to use your PC for this purpouse ... check this RAM: http://www.computersalg.dk[...] - 2 x 8GB ... 2400MHz CL10. 2 modules are better than 4 due to less heat, if you place 4 one by one ... under heavy conditions - it might be hot. So maybe those 2 x 8GB would be a good idea.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Okay :)
--

Så :) Opdateret liste: Fractal Design Define R4 Arctic White Corsair RM750 MSI Z97 GAMING 3 Crucial MX100 SSD 256GB G.Skill TridentX 16GB Intel Core i7-4770K Sapphire R9 290 Tri-x Noctua NH-U14S
--

#37 Perfect :) You could also think about some top fan (temps. inside will be better when the hot air could go out of the case), at least one ... i see one problem = case`s colour.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Der skulle være ret godt airflow da jeg fjerner de midterste 5 "skuffer" til harddiske. Jeg har også tænkt mig at gøre mit bedste for at have godt styr på cable management, så jeg får det maksimale ud af mine blæsere. Kan du ikke lide hvid?
--

If you don`t plan to use top fan holes you can check NZXT H230: http://www.techpowerup.com[...] There`s also: Nanoxia Deep Silence 1: http://www.scan.co.uk[...] CM 690 II White: http://www.guru3d.com[...] H440 is nice: https://www.komplett.dk[...] 600T White also: http://techdadreview.com[...] There`s also Bitfenix Prodigy M (Micro-ATX mobo needed - but it can be done): http://www.awd-it.co.uk[...] I don`t like white case ... when it`s full white, it looks kinda weird for me, somehow "very plastic" ;) Back fan isn`t much effective and hot air cumulates (goes to top) on top, having top fans / holes helps with temps. ... but if you don`t plan any heavy OC - temps. should be fine. No top fan holes / fans = more silent PC. So ... something ... for something. I use 120mm 300rpm top fan, which is inaudible, and hot air has a chance to go out.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Jeg sagde ikke at jeg ikke har planlagt at bruge de øverst, bare ikke som start. De kommer nok i brug (som du siger) hvis jeg laver OC. Tror jeg holder mig til Fractal, jeg kan rigtig godt lide den :) Skulle jeg have en anden, så er H440 min favorit (af dem du linkede til) Forresten, ved du om alle delene passer sammen? Eller skal jeg ud og købe nogle andre kabler?
--

If you like the R4 Arctic White - great :) - it probably look better (for me) in real life, than on photos. All will work fine = all cables, screws will be there (come with motherboard and case), thermal paste come with cpu cooler. P.S. H440 has no slot for 5.25" DVD-RW ... so-so.
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Så TUSIND tak for hjælpen ;D
--

You`re welcome, your future PC looks really great :)
--
P183 V3 @ 500rpm, P8P67 Deluxe, i7-2600K @ 4.0, NH-D14 @ 500rpm, 840 PRO 256GB, 8GB 1866/CL8, GTX 580 + Alpenföhn Peter @ 500rpm, SF 1000W Platinum

Så er den bestilt ;)
--