Der står VID udfra 1.400 ? er det mig som ikke har helt styr på hvad det er ?
--
#0 Kan måske skyldes dette(Advanced Power Settings i din bios) :
CPU Vcore Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
&&
VAXG Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU VAXG voltage. Selecting a higher level keeps the CPU VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
Tror de begge er med til at give et mere stabilt overclock
--
ASUS P8Z77-V LE Plus | Intel i7 3770k 3,5@4,5GHz | Kingston DDR3 HyperX 1600MHz 16GB(4x4) | MSI GTX 1070 ARMOR 8G OC | Samsung 840 EVO MZ-7TE250 SSD
så din anbefaling vil være ?
--
#0 VID = hvad din cpu prøver at trække. Dvs så vidt jeg ved er det din vcore +10/15% (generelt)
du skal finde en aflæsning der ORDRET hedder vcore - før du kan regne med det er din vcore..
hwmonitor kan bl.a. logge min/max vcore
kan fortælle at hwmonitor måler min max vcore til 1,232 - selvjom jeg har stillet den til 1,215
men VID måler max 1,302
--
TUF Mark 2 Z270, 7700k, Noctua D15, 1080 strix, 32" curved 1440p @ 144hz, 16gb Vengeance 3000, Evo 850 500gb m2, RM750x, Corsair 540
--
Sidst redigeret 18-02-2018 15:46
fandt lige hurtigt denne forklaring på overclockers.uk.. håber du kan en smule engelsk :)
"The VID is what Intel rates the chip at for stock speed. It's what your motherboard uses to know what core voltage to set. It's pretty much the stock voltage of the chip.
--
TUF Mark 2 Z270, 7700k, Noctua D15, 1080 strix, 32" curved 1440p @ 144hz, 16gb Vengeance 3000, Evo 850 500gb m2, RM750x, Corsair 540