du kan hente en Ultra bios på side her http://www.mvktech.net[...] og et flash program jeg brugte selv flash.v 4.46 ...læs dem her først Written by Mavke Monday, 15 March 2004 There are 2 ways on how to Backup your NVIDIA GeForce Graphics Card BIOS and those depend on the Program that you use. When you have made a Backup of your Original BIOS also submit it on my site or mail it to me! First of all you will have to make a bootable disk and put on there nvflash.exe (v4.42) or wfflash.exe (v5.1). After you created the bootatable disk, restart your PC with the boot disk. - Backup with nvFlash (nVidia) - Use nvFlash v4.42 or 5.13 Standard Procedure: 1. a:nvflash -b backup.rom [Enter] (to backup the Orginal BIOS) - Backup with WFFlash (Leadtek) - Use WFFlash v5.1 or 5.6 Standard Procedure: 1. a:wfflash.exe -s backup.rom [Enter] (to backup the Orginal BIOS) When you have a Backup of your Original BIOS, please also submit it on my site or mail it to me, so that I can put it in my Archive. Så kigger du her GeForce 6 & 7 Flash Procedures. - Flashing with nvFlash (nVidia) - Use nvFlash 5.13 Standard Procedure for 5.13: (flashing with 5.13 is recommended for the use with the 6x00 series NVIDIA cards, using the -4 switch forces flash and overrides vender mismatch) 1. a:nvflash -5 file.rom [Enter] Standard Flash (same card, same firmware) 2. a:nvflash -5 -6 file.rom [Enter] Standard Flash (same card, same firmware) 3. a:nvlfash -4 -5 -6 file.rom [Enter] Force Flash (different model card, different firmware) 4. a:nvlfash -4 -5 -6 -a -y file.rom [Enter] Automatic Force/Blind Flash (In case you screw up and cant see the screen - best to use this string for a autoexec.bat) It is highly recommended to use nvFlash over anything else when flashing NVIDIA cards. Flashing from a Bootable CD is not recommended. If you don't have a floppy, buy one, they are in-expensive while saving loads of hassles on some system configurations. *Important* If you are using softmods and other tweaking applications, uninstall them prior to flashing. This goes for Riva Tuner and others. Why? Because most people flash, leaving those programs resident, so those utilities, try to force the video card to those saved settings in software and that causes problems for a card with a fresh flash or a new device ID. *Remember* To always change out the drivers after a flash, most people forget this and then wonder why the drivers are giving them problems or why they get strange effects in there games. Always re-install the drivers and turn off any anti-virus before doing so. Rename the file to something thats easy to remember and point the string path too. Så hendter du flash program/ den Bios du vil bruge /eller du kan laver din egen bios om,og flashe med den.
--
Gæstebruger, opret dit eget login og få din egen signatur.

du skal først sikre dig dit kort kan køre ultra hastigved. derefter kan du finde info her http://www.mvktech.net[...] her er der bioser og guids til at flashe dem. husk at det er på eget ansvar
--
*Asus P5WD2*P4 830D*Gainward 7800GTX Golden Sample * *4x512PQI DDRII 5400*AUDIGY 2*Tagan TG 580-U15* *4x80 GB Samsung SATAII Raid 0*LiteOn SOHW-1696S-23-C*Samsung 913N 19"*

Bare spørg Martin v.R på overclocking.dk
--
Jeg overclocker alt! Undertegnede inklusive! MUharrhahaha!!!

Kan et V9999GT/TD/256M/A http://www.epcbuyer.com[...] Og så har jeg undret mig lidt over, hvorfor der er to X molex på det?!
--

3# du her heldig med det kort,samme kort som et ultra?bare men en anden bios hehe da ikke alle har ligge mange penge ,har assu sendt samme kort ud,med med forskelige Bios på.
--
Gæstebruger, opret dit eget login og få din egen signatur.

6800GT @480/1350 with Volt Moded Bios -------------------------------------------------------------------------------- After suffering with default bioses i decided to flash my card to some other MF bios. After modifiyng PNY GT bios version 1.2 to 1.4 V in 3d mode i did the flash. First think i noticed how much smoother this bios is. When exiting games or changing video res like in 3D mark its just so much better. Well the funny think happen when i started expert tool for the first time it recodnise the clock as 7/17 8o . But after installing VC drivers and rebooting once all went back to normal. I was able to run 3dmark @ 450/1200 wihout artifacts. Doom3 @1280/1124 timedemo with Ultra Quality graphics ran 78 fps with 4x AA and 8X AF. And it was realy much smoother comparing me runnig 420/1200 before with gainward bios. I strongly recomend to any gainward 6800GT owner to do the same i did. It just not worth it to have this exelent card with default bios. Now there is no crashes even at 450/1200. If anyone wants the bios i'm attaching it here. Its PNY v1.2 V3d= 1.4 V2d= 1.1 @400/1100 clock set as default. Or you can download Omni bios ediotor and do it yourself Here is a scht of my 3Dmark score. It was run on Highest posible graphics seting. I kind of dont like my 2nd cpu test score, strange is evryone gets it like this? i mean 3.8 is not that bad The max i pushed the card was 480/1250. After 2nd test in 3D mark i sw artifacts so i closed it and set it back. But it just proves that this card is realy capable of overclock. I wnder if i set V3d to 1.5 then what will happen If you attempt to do anythink like this to ur GT make sure u get good cooling or results might be not as same as myne i do get max 46c-50c @full load
--
Gæstebruger, opret dit eget login og få din egen signatur.

http://forums.extremeoverclocking.com[...]
--
Gæstebruger, opret dit eget login og få din egen signatur.

#3 Det lyder jo dejligt at jeg kan sætte lidt mere skub i mit kort. Jeg gav også 3000 for det! Er det korrekt at jeg skal opdatere bios, og bruge noget software til at skrue op for musikken, og det så er et ultra? Eller hür..
--

mange tak for info. jeg læser dette igennem, så jeg kan foretage en fin opgradering af mit gfx :)
--

få også fat i det program de har,som heder Nibitor. i Nibitor kan du stille cas på dine ram/blæser hastighed/så kan du lave din egen hastighed på 2D /thrtl/3D+ volt jeg lavede min egen bios om,så jeg ikke skulle skruge op og ned for core/ram hele tiden. (thrtl )er en hastige der gå fra 2D til 3D, for at skåne dit kort for hurtig optur/nedtur mellem 2D/3D,så det får en blød overgang du kan se i denne profil på mig,hvordan jeg har sat (thrtl) http://www.hardware-test.dk[...]
--
Gæstebruger, opret dit eget login og få din egen signatur.

til dem som har et asus v9999GT med 256ddr3 brug denne bios http://www.mvktech.net[...]
--
Gæstebruger, opret dit eget login og få din egen signatur.

nogle af ASUS v9999 har 1,6ns ram så kig lige efter vilke ram i har ved 1.4v=1,6ns =1250/1350mhz ved 1.5v=16,ns=ca:1350/1450mhz ved 1,4v=2,0ns=1150/1250mhz ved 1,5v=2,0ns=1250/1350mhz
--
Gæstebruger, opret dit eget login og få din egen signatur.

ehm, hvordan faen flasher man sådan et kort der, har selv et asus v9999/td 128mb, og ku da godt tænke mig at få at vide om det kan la sig gøre at flashe det... og hvordan evt
--

til#12 læs #8
--
Gæstebruger, opret dit eget login og få din egen signatur.

#12 ja du kan flashe det men husk at sætte bios på bundkort/AGP TIL 1,55V NÅR I BRUGER 1,44V PÅ GRAFIKKORTE ville gerne lave det for jer,men har lige solgt mit sys for 7000,- her til JUL men det tager ikke mere en max 2min at lave et nyt flash . kig god på denne side,der er alt hvad i skal bruge,og de er søde til at hjælpe http://www.mvktech.net[...]
--
Gæstebruger, opret dit eget login og få din egen signatur.

Martin jeg kan måske fange dig på o.c hvis jeg har spørgsmål... men først skal jeg lige ha' fat i et floppy hvis det er meget vigtigt for at flashe korrekt!
--